The automatic cement brick machine has a certain service life. Its service life is related to the quality of the equipment, performance, operation method, maintenance and so on. In order to extend the service life of the cement brick machine, let's summarize how to extend the automatic cement brick What are the methods for the service life of the machine

What are the ways to extend the service life of the fully automatic cement brick machine?

  1. The operator should conduct technical training before starting to work, and be familiar with the structure, performance, operation methods and precautions of the fully automatic cement brick machine;
  2. The operator should wear tooling and safety helmet before starting the machine, and check whether the equipment is worn out and whether the equipment is normal;

3. After the equipment work is over, clean up the dirt on the mold and the moving parts of the equipment in time. After the automatic cement brick machine works for a period of time, the filter should be cleaned or replaced, and the hydraulic oil needs to be filtered. The oil temperature should be controlled at 45-80 degrees to avoid damage to the hydraulic system;

  3. Avoid the appearance of hitting and bumping. When the automatic cement brick machine is working, do not bump the moving parts, and ensure that the moving parts are not corroded;
  4. The equipment should not be overloaded, and the equipment should be operated in accordance with the manufacturer’s technical requirements. The equipment should be shut down for a period of rest after 10-12 hours of work;
  5. During the working process of the fully automatic cement brick machine, if the equipment is found to be abnormal, it should be shut down for maintenance and cannot continue to work;
  6. Clean the moving parts of the equipment before work every day, and add lubricating oil to ensure that the moving parts are not worn and can work continuously and efficiently;
  7. Clean up the raw materials scattered around the equipment weekly to avoid being blown into the bearings, copper sleeves, columns, cylinders and hydraulic systems;
   8. Overhaul once every half a month, check whether the screws are loose and whether the bearings lack lubricating oil;
  9. To clean the mold before leaving work every day, the mixture on the mold must be cleaned to reduce the friction between the upper punch and the lower mold box.
The above is the method to prolong the service life of the fully automatic cement brick machine summarized by our manufacturer for you. No matter how long your equipment is used, you need to pay attention. These methods and skills can be used. I hope the equipment operators can master it. , If you have a better way, you can also introduce it to me for update.